The idea of creating a minibar from a regular canister is one that comes by chance. Usually while parsing old things. The user showed how an unnecessary item became necessary.
To create a minibar from an old canister, the master needed a canister, a thin rubber seal, small screws and screws, universal loops, a marker, heck or other closing elements, plywood, polyurethane adhesive, paint and tools,
transmits “Do it yourself”.
First, the user marked with a marker and ruler. He recalled that the upper part, the lid, must be of the proper size, since the interior of the minibar will pass through it.
After cutting the “door” all the uneven edges of the metal were ground and covered with a rubber seal. Moreover, this was done not only on the surface of the body of the future mini-bar, but also on its cover.
After installing the seal, holes were planned for the loops and the loops themselves were installed. The optimum number is 2-4 pcs. You can even pick up the hinges in the color of the case or paint the inside of the canister in the color of the seal. After attaching the heck or other closing elements, the body of the minibar is ready.
The filler here can be shelves made of thin plywood, about 1 cm thick. It is marked out taking into account the estimated number of shelves inside the minibar. After marking, the compartments are assembled in a single structure and mounted in the canister body using polypropylene glue. After all the elements have dried, the finished minibar can be filled.
Previously reported
rules to be followed to visually expand the small room.
[video = "youtu.be/jpdZzYPrA2U"]