Creative designers will 3D print a village of 12 houses
Construction company ATM will build a village in the Yaroslavl region, consisting of 12 houses. The originality of the project lies in the method and materials - the structures will be erected using a 3D printer.
Builders use an S-300 field printer. And houses will be located on a plot of 1.5 hectares.
At the moment, the construction of the first house with an estimated cost per square meter of about $ 300 is being completed. The second house should be assembled in 30 hours. And the third house will become a visual demonstration of the printer. And the emphasis here will be on the complexity of the forms.
It is noted that the technology of building houses using 3D printing is not much different from printing other objects with molten plastic. The same machines are used, only their size is several times larger. Nevertheless, they allow you to print any design - to realize the architect's imagination.
As for the printer, it makes no difference to the device to print a rectangular building or print an ornate design with towers, curves and columns.
The sites on which it is planned to create an unusual village have been equipped with all the necessary communications. The engineers have already supplied electricity, sewage and water.
This isn't the first time the company has come across 3D printing. In 2017, she already created a small house using this technology.
But building a house is only half the battle. It also needs to be equipped. The section of the OXO site "House, interior" will help with this. More than 7 thousand thematic lots are presented there.
Builders use an S-300 field printer. And houses will be located on a plot of 1.5 hectares.
At the moment, the construction of the first house with an estimated cost per square meter of about $ 300 is being completed. The second house should be assembled in 30 hours. And the third house will become a visual demonstration of the printer. And the emphasis here will be on the complexity of the forms.
It is noted that the technology of building houses using 3D printing is not much different from printing other objects with molten plastic. The same machines are used, only their size is several times larger. Nevertheless, they allow you to print any design - to realize the architect's imagination.
As for the printer, it makes no difference to the device to print a rectangular building or print an ornate design with towers, curves and columns.
The sites on which it is planned to create an unusual village have been equipped with all the necessary communications. The engineers have already supplied electricity, sewage and water.
This isn't the first time the company has come across 3D printing. In 2017, she already created a small house using this technology.
But building a house is only half the battle. It also needs to be equipped. The section of the OXO site "House, interior" will help with this. More than 7 thousand thematic lots are presented there.
